VerteX pH 7 Neutral Universal Coil Cleaner

VerteX is a pH 7 neutral universal coil cleaner manufactured by Aspen Pumps Ltd., designed for cleaning condensers, evaporators, and other similar components in HVAC systems. It is a non-corrosive, adaptive cleaner specifically formulated for professional use in food processing areas and other industrial settings.

Product Overview

VerteX is a liquid cleaner with a pleasant odour, available in a 5L container that can be diluted to make 25-45 litres of cleaning solution. It is registered with NSF International under Category Code K4 (NSF Registration No. 162877), making it suitable for use in food processing areas where it must not come into direct or indirect contact with food or potable water.

• Manufacturer: Aspen Pumps Ltd., Guardian House, Stroudley Road, Basingstoke, RG24 8NL, United Kingdom
• Product Form: Mixture (liquid, green color)
• pH Level: Neutral (pH 7)
• Volume: 5L (makes 25-45L when diluted)
• NSF Certification: Category K4 for cleaning coils, condensers, and evaporators

Key Features

• Non-corrosive with a neutral pH of 7, making it safe for microchannel coils and those with protective coatings.
• Quickly removes grease, fat, rust, and scale from HVAC components.
• Neutralizes unpleasant malodors, improving air quality.
• 100% biodegradable, ensuring environmental friendliness.
• Safe for condensate pumps, preventing damage to HVAC systems.

Composition and Ingredients

VerteX is a mixture containing the following key ingredients, as outlined in its Safety Data Sheet (SDS):

• Citric Acid (5-10%): Causes eye irritation and may cause respiratory irritation (Eye Irrit. 2, H319; STOT SE 3, H335).
• 2-Aminoethanol (1-3%): Causes severe skin burns and eye damage, and is harmful if swallowed, inhaled, or in contact with skin (Skin Corr. 1B, H314; Acute Tox. 4, H302/H312/H332).
• Non-Ionic Surfactant (1-3%): Causes eye irritation (Eye Irrit. 2, H319).
• 3-Methoxy-3-Methylbutan-1-ol (0.1-1%): Causes eye irritation (Eye Irrit. 2, H319).

The mixture does not contain PBT/vPvB substances or endocrine disruptors above 0.1%, per REACH regulations.

Hazards and Safety Information

VerteX is classified under Regulation (EC) No. 1272/2008 [CLP] as:

• Skin Irritation (Category 2, H315): Causes skin irritation.
• Serious Eye Irritation (Category 2, H319): Causes serious eye irritation.

First Aid Measures:

• Inhalation: Move to fresh air and keep comfortable for breathing.
• Skin Contact: Wash with plenty of water. Remove contaminated clothing. Seek medical advice if irritation persists.
• Eye Contact: Rinse cautiously with water for several minutes. Remove contact lenses if present. Seek medical advice if irritation persists.
• Ingestion: Call a poison center or doctor if unwell. Do not give anything by mouth to an unconscious person.

Emergency Contact (UK): National Poisons Information Service (for healthcare professionals): 03448920111; NHS 111: 111; CHEMTREC (24hr): +44 (0) 1256854318.

Directions for Use

VerteX is designed for professional use on various HVAC components. Follow these dilution and application instructions:

Evaporator Coils

Dilution: 1 part VerteX to 8 parts water.

• Start cleaning at the top of the coil, working methodically across and down.
• For split-style units, turn off the unit and isolate electrics.
• Apply diluted VerteX using a low-pressure sprayer with a coarse spray pattern.
• Soak the coil and let it work for 5 minutes.
• No rinsing is required (the cooling process naturally rinses the coil), but heat pump systems should be rinsed.
• Turn the unit back on.

Large Air Handling Units

• Keep airflow on if possible to ensure complete coil penetration; otherwise, turn airflow on immediately after application.
• Apply diluted VerteX (1:8) on a coarse spray pattern with a low-pressure sprayer.
• Saturate the coil to the run-off point.
• Rinse thoroughly with clean water.

Air-Cooled Condensers

Dilution: 1 part VerteX to 4 parts water.

• Apply diluted VerteX with a low-pressure sprayer on a coarse spray pattern.
• Let it work for 5-10 minutes.
• Rinse away dirt and contamination with clean water (rinse water is non-hazardous).
• Start cleaning at the top of the coil, working methodically down and across.
• Cleaning is more effective if the condenser is still warm.

Air Filters

Dilution: 1 part VerteX to 2 parts water.

• Turn off the unit and fans.
• Spray diluted VerteX liberally on electronic air filters.
• Allow it to penetrate for 5 minutes.
• Rinse thoroughly with clean water.

Storage and Handling

• Store in a cool, dry place (5-30°C) away from oxidizing agents.
• Ensure good ventilation in the work area.
• Wear personal protective equipment, including safety glasses, nitrile gloves (0.1-0.2mm thickness), and suitable clothing.
• Wash hands thoroughly after handling and avoid eating, drinking, or smoking while using the product.

Environmental and Regulatory Information

• Biodegradability: 100% biodegradable, with no significant environmental impact.
• Ecological Impact: Not hazardous to the aquatic environment (short-term or long-term).
• Regulatory Compliance: Complies with REACH Regulation (EC) 1907/2006, amended by Regulation (EU) 2020/878. Contains no substances listed on REACH Annex XVII, XIV, or the Candidate List (SVHC).
• Transport: Not regulated as dangerous goods under ADR, IMDG, IATA, ADN, or RID.
• Waste Disposal: Dispose of in accordance with local regulations at an authorized site.

Comparison with Other Products

VerteX is part of Advanced Engineering's coil cleaner lineup, alongside EasyClean and AdvancedGel UC:

• EasyClean: A high-powered aerosol (600ml, pack of 12) for evaporators and condensers, focusing on safe, dirt-only cleaning.
• AdvancedGel UC: A biodegradable concentrate (490ml, pack of 5, makes 8L), effective against dust, lint, and grease, improving energy efficiency.
• VerteX stands out for its neutral pH, non-corrosive nature, and suitability for microchannel coils, with a larger diluted yield (25-45L).